DART-6UL GPIO

From Variscite Wiki
Revision as of 15:22, 27 December 2015 by Ron (talk | contribs) (Created page with "{{PageHeader|DART-6UL- GPIO}} {{DocImage|category1=DART-6UL|category2=Yocto}} __toc__ = GPIO state = The current state of the systems' GPIOs can be obtained in user-mode, as...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
DART-6UL- GPIO


GPIO state

The current state of the systems' GPIOs can be obtained in user-mode, as shown in the following example:

$ cat /sys/kernel/debug/gpio

The above command on Variscite's VAR-DVK-MX6 will show the following:

root@imx6ul-var-dart:~# cat /sys/kernel/debug/gpio
GPIOs 0-31, platform/209c000.gpio, 209c000.gpio:
 gpio-10  (phy-reset           ) out lo    

GPIOs 32-63, platform/20a0000.gpio, 20a0000.gpio:

GPIOs 64-95, platform/20a4000.gpio, 20a4000.gpio:
 gpio-68  (ft5x06_irq_gpio     ) in  hi    

GPIOs 96-127, platform/20a8000.gpio, 20a8000.gpio:
 gpio-115 (2190000.usdhc cd    ) in  hi    
 gpio-116 (IDE Activity        ) out lo    
 gpio-117 (Heart Beat          ) out lo    

GPIOs 128-159, platform/20ac000.gpio, 20ac000.gpio:
 gpio-128 (phy-reset           ) out lo 

Each GPIO is defined as in or out and the state is shown as lo or hi.
For example pin 110 is the SD-Card card-detect. When SD-Card is removed the state will be:

 gpio-115 (2190000.usdhc cd    ) in  hi 

When the SD-Card is plugged the state will be:

 gpio-115 (2190000.usdhc cd    ) in  lo 

Manipulating a single GPIO via /sys/class/gpio

GPIOs in i.MX6 are grouped in groups of 32 pins.
For example GPIO1_3 belong to the first group pin 3. Its absolute number will be 3.
GPIO7_4 will be (7-1)*32+4=196.
Lets assume that you defined this GPIO in the device tree. We will show in the following sections how to define it.
To configure as output:

$ echo 196 > /sys/class/gpio/export
$ echo out > /sys/class/gpio/gpio196/direction

Set GPIO high:

$ echo 1 > /sys/class/gpio/gpio196/value

Set GPIO low:

$ echo 0 > /sys/class/gpio/gpio196/value

To configure as input:

$ echo 196 > /sys/class/gpio/export
$ echo in > /sys/class/gpio/gpio196/direction
$ cat /sys/class/gpio/gpio196/value

Will read the current value.

Kernel Device Tree GPIO configuration

Device Tree GPIO files

Pin Func files

In the Linux kernel in directory arch/arm/boot/dts/ you will find the pin functions files.
The relevant file is: imx6ul-pinfunc.h. If you edit imx6ul-pinfunc.h and search for GPIO4_IO24 for example you will see a group of pins with same prefix "MX6UL_PAD_CSI_DATA03".

#define	MX6UL_PAD_CSI_DATA03__CSI_DATA05                         	0x01F0 0x047C 0x04CC 0 0
#define	MX6UL_PAD_CSI_DATA03__USDHC2_DATA3                       	0x01F0 0x047C 0x0688 1 0
#define	MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD                      	0x01F0 0x047C 0x0000 2 0
#define	MX6UL_PAD_CSI_DATA03__ECSPI2_MISO                        	0x01F0 0x047C 0x0548 3 0
#define	MX6UL_PAD_CSI_DATA03__EIM_AD03                           	0x01F0 0x047C 0x0000 4 0
#define	MX6UL_PAD_CSI_DATA03__GPIO4_IO24                         	0x01F0 0x047C 0x0000 5 0
#define	MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK                       	0x01F0 0x047C 0x0000 6 0
#define	MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS                      	0x01F0 0x047C 0x0000 8 0
#define	MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS                      	0x01F0 0x047C 0x0640 8 0

Selecting one of them and writing it in the dts file will set the functionality required for this pin.

Variscite dts files

Variscite defines dts file for each platform.

Device Tree Name
SOM type
Carrier Board type
LCD Type
Evaluation Kit name
imx6ul-var-dart.dts DART-6UL VAR-6ULCustomBoard Capacitive/ touch VAR-STK-6UL
VAR-DVK-6UL

imx6ul-var-dart.dts starts with definitions and including dtsi files.


#include <dt-bindings/input/input.h>
#include "imx6ul.dtsi"


The imx6ul.dtsi define the CPU platform and which pinfunc file will be included. This feature allow the pin name to be agnostic to the CPU type (i.MX6Q vs i.MX6DL)
We create 4 DTB's out of imx6ul-var-dart.dts.

imx6ul-var-dart-nand_wifi.dts
imx6ul-var-dart-sd_nand.dts
imx6ul-var-dart-emmc_wifi.dt
imx6ul-var-dart-sd_emmc.dts 

They just define one of

/* #define WIFI */
/* #define EMMC */
/* #define  NAND  */

The WIFI and SCDARD share the same MMC interface. So only one of them can be activated at a time. The NAND and eMMC share the same interface I/O. So only one of them can be activated at a time.

Define a pin as GPIO in the kernel Device Tree


First you need to modify the relevant device tree and make sure your gpio is defined.
For Example:
Edit arch/arm/boot/dts/imx6ul-var-dart.dts and in the section below:

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	pinctrl-0 = <&pinctrl_hog_1>;
	imx6ul-evk {
		pinctrl_hog_1: hoggrp-1 {
			fsl,pins = <
				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0 /* Led 1 */
				MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x1b0b0 /* Led 2 */
				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
				MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT Enable */
			>;
		};


Add the relevant GPIO to the above section in the device tree.

Device Tree GPIO attribute

If you look at cat Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt the number to the right of the pin control spec can be used for additional attributes like pull-ups, pull-downs, keepers, drive strength, etc.
The value 0x80000000 is don't know value please use the default". Else use the table below to set it to the required value.

CONFIG bits definition
value
PAD_CTL_HYS (1 << 16)
PAD_CTL_PUS_100K_DOWN (0 << 14)
PAD_CTL_PUS_47K_UP (1 << 14)
PAD_CTL_PUS_100K_UP (2 << 14)
PAD_CTL_PUS_22K_UP (3 << 14)
PAD_CTL_PUE (1 << 13)
PAD_CTL_PKE (1 << 12)
PAD_CTL_ODE (1 << 11)
PAD_CTL_SPEED_LOW (1 << 6)
PAD_CTL_SPEED_MED (2 << 6)
PAD_CTL_SPEED_HIGH (3 << 6)
PAD_CTL_DSE_DISABLE (0 << 3)
PAD_CTL_DSE_240ohm (1 << 3)
PAD_CTL_DSE_120ohm (2 << 3)
PAD_CTL_DSE_80ohm (3 << 3)
PAD_CTL_DSE_60ohm (4 << 3)
PAD_CTL_DSE_48ohm (5 << 3)
PAD_CTL_DSE_40ohm (6 << 3)
PAD_CTL_DSE_34ohm (7 << 3)
PAD_CTL_SRE_FAST (1 << 0)
PAD_CTL_SRE_SLOW (0 << 0)